UltraOkay

Is it OK for your ultrasonic cleaner?

Jewelry (general)

Yes
Check first
No

Metal without stones is almost always fine – answer the questions.

Updated from your answers.

A few questions to be sure

Is the piece solid, or plated/gilded?
Are there stones in the piece?
Are the stones glued (no metal holding them)?

How to do it

Time
3 min
Water
Lukewarm, 30–40 °C

One or two drops of mild, unscented dish soap. Rinse in clean water and dry with the microfiber cloth.

With these answers we do not recommend the ultrasonic cleaner, so there is no how-to.

Pick your cleaner to see if it fits, which setting to use and what its manual says.

Why

Pandora states that ultrasonic cleaning is suitable for most metal jewelry without stones. Plating, delicate stones and glue are the most common reasons not to.

Watch out for

  • Do not run different metals together
  • Check stones before and after

Sources

  1. Pandora – jewellery care and maintenance
  2. GIA – gemstones and ultrasonic cleaners
  3. AGS – Care for your jewelry (PDF)

Cleaners that fit this

Ranked by fit, never by commission.

How we rank: models made for this kind of item first, then how easy the model is to buy where you are, then how much of its spec is confirmed in a source.

We may earn a commission when you buy through these links. It never changes an answer. How this works

    We may earn a commission when you buy through these links. It never changes an answer. How this works

    Good to have for this

    We may earn a commission when you buy through these links. It never changes an answer. How this works

    Clean it safely another way The safe way while you check

    We may earn a commission when you buy through these links. It never changes an answer. How this works

    Good to know

    Related

    Which cleaner do you have?

    Pick your model and every answer adapts to it: tank size, heater, timer and the warnings in its manual.

      Can't find yours?

      Describe it and we use a similar profile.