UltraOkay

Is it OK for your ultrasonic cleaner?

Stud earrings

Yes
Check first
No

Studs and backs come out clean – the stone decides.

Updated from your answers.

A few questions to be sure

Are there stones in the piece?
Are the stones glued (no metal holding them)?

How to do it

Time
3 min
Water
Lukewarm, 30–40 °C

Take the stud and the back apart so that the water reaches everywhere.

With these answers we do not recommend the ultrasonic cleaner, so there is no how-to.

Pick your cleaner to see if it fits, which setting to use and what its manual says.

Why

Posts and backs collect a lot of dirt and are easy to run. Diamond or CZ studs in a setting are fine, but pearl studs are glued to the post.

Watch out for

  • Pearl studs: avoid
  • Small parts – do not pour the water out into the sink

Sources

  1. Pandora – jewellery care and maintenance
  2. GIA – pearl care

Cleaners that fit this

Ranked by fit, never by commission.

How we rank: models made for this kind of item first, then how easy the model is to buy where you are, then how much of its spec is confirmed in a source.

We may earn a commission when you buy through these links. It never changes an answer. How this works

    We may earn a commission when you buy through these links. It never changes an answer. How this works

    Good to have for this

    We may earn a commission when you buy through these links. It never changes an answer. How this works

    Clean it safely another way The safe way while you check

    We may earn a commission when you buy through these links. It never changes an answer. How this works

    Good to know

    Related

    Which cleaner do you have?

    Pick your model and every answer adapts to it: tank size, heater, timer and the warnings in its manual.

      Can't find yours?

      Describe it and we use a similar profile.